Power up sae 15w-40 semi syn ck-4

Part No. 132979

1000 Litre

NEW SEMI SYN 15W-40 CK-4 with unique Techtron system is an advanced part synthetic heavy duty engine oil. Conforming to the requirements of PC-11 engine oil technology, it can be used in diesel engines where API CK-4 or, CJ-4 and below is required. Specifically engineered to deliver longer oil life, enabling longer service intervals even under severe operating conditions. This semi synthetic 15W40 CK-4 also meets the Cummins CES 20092, CES 20086.

Excel under high pressure
Very good dispersancy and detergency.
Excellent protection against wear, foam, corrosion and oxidation properties.
Performs under high heat and friction
Excellent protection against “Bore Polishing”.
Suitable for low emission engine equipped with EGR and SCR technology
Fuel conserving.
Extended oil drain interval between 50,000 to 100,000km

Properties	Method	Unit	Results
Density @ 15°C	ASTM D 4052	kg/m³	0.88
Viscosity @ 40°C	ASTM D 445	mm²/s	109
Viscosity @ 100°C	ASTM D 445	mm²/s	14.5
Viscosity Index	ASTM D 2270	-	137
Flash point (COC)	ASTM D 92	°C	230
Pour point	ASTM D 97	°C	-30
Total Base Number	ASTM D 2896	mg KOH/g	12
Sulpated Ash	ASTM D 874	%Wt	1.00
Zinc	-	%	0.90
Phosphorus	-	%	1.00
Viscosity, CCS@ -20°C	ASTM D 5293	mPa.s	6200

Specifications - Approvals: API CK-4 CAT ECF-3 Mack EOS-4.5 Volvo VDS-4.5 DDC DFS 93K222 Cummins CES 20086 RVI RLD-4, Cummins CES 20092, CES 20086, Caterpillar ECF-3, or JASO DH-2 are specified, Detroit Diesel DFS 93K222, DFS 93K218, Deutz DQC III-18LA, Renault VI RLD3, ACEA E9, ACEA E7, MB 228.31, MTU Category 2.1

Can't find a part?

We pride ourselves on providing our customers with the right part the first time. Contact us and we will source it for you.